Asphalt shingle
Architectural vs. 3-Tab Shingles in Florida: What Actually Separates Them
Architectural vs 3-tab shingles in Florida: what a wind rating really means, why nailing matters as much as the shingle, and how repairs and colors match.
Roof replacement
Roof Replacement Process, Step by Step
A step-by-step walkthrough of a Florida roof replacement: tear-off, decking, re-nailing, underlayment, flashing, and the final inspection and sign-off.
Storm damage
Storm Damage vs. Normal Roof Wear: How to Tell the Difference
After a Florida storm, wind damage, hail bruising and plain wear can look alike from the ground. Here is how to tell them apart and what to do next.
Roof leaks
Where Roof Leaks Actually Start
The ceiling stain is rarely above the hole. How water tracks along decking before it drops, the real starting points, and what the pattern tells you.
Manufacturer certifications
Manufacturer Roofing Certifications: What They Actually Mean
What a manufacturer certification requires, how it differs from a state license, what an enhanced warranty covers, and how to verify a contractor's claim.
Emergency tarping
Emergency Roof Tarping: What It Does and Does Not Do
What an emergency roof tarp actually buys you, how long one lasts in Florida sun and wind, and what to photograph before anyone covers the damage.
Asphalt shingle
Shingle Roof Repair or Replacement: How to Tell
When a shingle roof is worth repairing and when patching wastes money: granule loss, brittleness, leaks moving around, and matching faded shingles.
Roof inspection
What a Roof Inspection Includes
What a roofer actually checks up there, how a roof inspection differs from a four-point and a wind mitigation inspection, and what the report should say.
Tile roofing
Tile Roof Repair in Florida: What Actually Fails
Florida tile roofs fail from the underlayment up, not the tile down. How to tell repair from relay from replacement, and why walking tile costs you.
Licensing
How to Choose a Roofing Contractor in Florida
What to check before you hire: the license class, how to verify it on DBPR, insurance, a written scope, who pulls the permit, and storm-chaser signs.
Slate
Slate and Shake Roofs in Florida: Why Both Are Rare Here
Real slate and cedar shake are both uncommon on Florida roofs, and for good reasons. What synthetic slate actually is, and how each behaves in this climate.
Flat roofs
Flat Roof Specialists: What a Low-Slope Roof Needs
Flat and low-slope roofs fail differently in Florida. Ponding, membrane choices, where the details go wrong, and what to ask before you hire.
TPO membrane
TPO on a Mobile Home Roof: Where It Works and Where It Does Not
What a TPO membrane does well on a manufactured home, where it is the wrong answer, how it compares with metal and coatings, and what the deck has to be.
Metal roofing
What Drives the Cost of a Metal Roof in Florida
What actually moves the price of a Florida metal roof: panel type, gauge, fastening, tear-off and what the inspector finds on the deck underneath.
Mobile homes
Mobile Home Roofing: Roof-Over, Recoat or Replace?
Mobile home roofs fail differently from site-built ones. How to tell whether you need a recoat, a roof-over or a full replacement.
Wind mitigation
What a Wind Mitigation Inspection Actually Looks At
What the Florida wind mitigation form measures on your roof, who is allowed to sign it, and which of those things are decided the day a roof is replaced.
Roof lifespan
How Long Does a Roof Last in Florida?
Florida roofs rarely reach their manufacturer rating. What shortens them on the Gulf Coast, what each material gives you, and when insurers start asking.